Bullet design #31-099WN detail

Approximate weight in clip-on wheel weight alloy: 99 grains

Filled view of bullet 31-099WN. Dimensioned view of bullet 31-099WN.

Bullet Notes:

This is designed to be bored upside down from the bottom of the mold block. The block is shortened to the length of the cavity. 1.375" maximum length. It becomes a nose pour, and requires a hollowing base pin to be made and installed by the customer. You will receive an unfinished mold with the cavity cut clear through the mold block, because I do not make hollowing pins.